Sony ILCE-7RM2 Film Camera User Manual


 
[325] Troubleshooting Troubleshooting Shooting still images/movies
The aperture value and/or shutter speed flashes.
The subject is too bright or too dark to shoot using the current aperture value
and/or shutter speed settings. Readjust the settings.
[326] Troubleshooting Troubleshooting Shooting still images/movies
The image colors are not correct.
Adjust [White Balance].
[Picture Effect] is set. Set [Picture Effect] to [Off].
[Picture Profile] is set. Set [Picture Profile] to [Off].
To reset settings to default, perform [Setting Reset].
[327] Troubleshooting Troubleshooting Shooting still images/movies
Noise appears in the image when you view the screen in
a dark place.
The product is attempting to increase the visibility of the screen by temporarily
brightening the monitor under conditions of low illumination. There is no effect
on the recorded image.
[328] Troubleshooting Troubleshooting Shooting still images/movies
The eyes of the subject come out red.
Set [Red Eye Reduction] to [On].
Shoot the subject at a distance closer than the flash range using the flash.