Filter
Top Products
4. Adjust the composition and shoot the image.
When you want to release the FEL lock, press the button to which [FEL
Lock toggle] is registered again.
Flashes that support FEL lock
HVL-F60M, HVL-F43M and HVL-F32M can be used as clip-ons, off-camera
connected by a cable, and for wireless flash shooting (controller/remote).
HVL-F20M can be used as a clip-on, off-camera connected with a cable, and
for wireless flash shooting (controller).
Note
The FEL lock cannot be set when a flash is not attached.
If a flash that does not support the FEL lock is attached, an error message is
displayed.
When both AE and FEL lock are fixed, lights up.
Hint
By setting [FEL Lock hold], you can hold the setting while the button is pressed
down. Also, by setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.], you
can shoot images with the AE locked in the following situations.
When [Flash Mode] is set to [Flash Off] or [Autoflash].
When the flash cannot go off.
When using an external flash that is set to manual flash mode.
[56] How to Use
Using shooting functions Selecting a screen display mode
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display
changes.
Graphic Display