High temperature locations such as in a car parked under the sun
Locations exposed to direct sunlight
Humid locations or locations with corrosive substances present
To use a Memory Stick Micro media with this product, be sure to insert the
Memory Stick Micro media into an M2 Adaptor as large as Duo size. If you
insert a Memory Stick Micro media into the product without an M2 Adaptor as
large as Duo size, you might not be able to remove it from the product.
To use a microSD memory card with this product, be sure to insert the microSD
memory card into a dedicated adaptor.
When inserting a memory card into a memory card adaptor, be sure that the
memory card is inserted in the correct direction and then insert it as far as it will
go. If the card is not inserted properly, it may result in a malfunction.
[287] How to Use Precautions/This product Cleaning this product
On cleaning
Cleaning the lens
Do not use a cleaning solution containing organic solvents, such as thinner, or
benzine.
When cleaning the lens surface, remove dust with a commercially available
blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or
tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral
pattern from the center to the outside. Do not spray lens cleaning solution
directly onto the lens surface.
Cleaning the camera body
Do not touch the parts of the product inside the lens mount, such as a lens signal
contact. To clean inside the lens mount, use a commercially available blower* to
blow any dust off.
*
Do not use a spray-type blower as doing so may cause a malfunction.
Cleaning the product surface
Clean the product surface with a soft cloth slightly moistened with water, then
wipe the surface with a dry cloth. To prevent damage to the finish or casing: