Filter
Top Products
occur while using the AC Adaptor, immediately disconnect the plug from the
wall outlet (wall socket) to disconnect from the power source.
When you use a completely new battery pack or a battery pack that has not
been used for a long time, the charge lamp may flash quickly when the battery
is charged for the first time. If this happens, remove the battery pack or
disconnect the USB cable from the camera and then re-insert it to recharge.
Do not continuously or repeatedly charge the battery pack without using it if it is
already fully charged or close to fully charged. Doing so may cause a
deterioration in battery performance.
When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
Be sure to use only genuine Sony brand battery packs, micro USB cables
(supplied) and AC Adaptors (supplied).
[15] How to Use Preparing the camera Charging the battery pack
Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a
micro USB cable.
1. Turn off the product, and connect to the USB terminal of the computer.
Note
Note the following points when charging via a computer:
If the product is connected to a laptop computer that is not connected to a power
source, the laptop battery level decreases. Do not leave the product connected to a