Filter
Top Products
Sets the AF Track Duration to high. This mode is useful when recording movies
when the subject is moving quickly.
Normal:
Sets the AF Track Duration to normal. This mode is useful when you want to keep
the focus on a certain subject when there are some obstacles in front of the
subject or in crowded places.
[90] How to Use Using shooting functions Adjusting the focus
Measuring the exact distance to the subject
The mark shows the location of the image sensor*. When you measure the
exact distance between the product and the subject, refer to the position of the
horizontal line.
The distance from the lens contact surface to the image sensor is about 18 mm
(23/32 in.).
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the
focus cannot be confirmed. Make sure you put enough distance between the
subject and the product.
[91] How to Use Using shooting functions Adjusting the focus
Priority Set in AF-S