Filter
Top Products
13
Quick Start Guide
Recording a picture (p. 34)
Monitoring the playback picture on the LCD
screen (p. 52)
NOTE
Do not pick up your
camcorder by the
viewfinder, the LCD panel,
the battery pack or the jack
cover.
1Set the POWER switch to VCR while
pressing the small green button.
2Press of the touch panel to
rewind the tape.
3Press of the touch panel to
start playback.
NOTE
When using the touch panel, press
operation buttons lightly with your
thumb supporting the LCD screen from
the rear of it. Do not press the LCD
screen with sharp-pointed objects such
as a pen.
1Remove the lens cap.
2Set the POWER switch to
CAMERA while pressing the
small green button.
4Press START/STOP. Your
camcorder starts recording. To
stop recording, press START/
STOP again.
3Press OPEN to
open the LCD
panel. The picture
appears on the
screen.
When you purchase your camcorder, the clock setting
is set to off. If you want to record the date and time on a
picture, set the clock setting before recording (p. 29).
Viewfinder
When the LCD panel is
closed, pull out the
viewfinder until it clicks.
Adjust the viewfinder
lens to your eyesight
(p. 39).
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK