Filter
Top Products
246
Wijzigen van de oorspronkelijke
menu-instellingen
Terugkeren naar het FN beginscherm
Raak de EXIT toets aan.
De hoofdpunten van het instelmenu worden
aangegeven als de volgende pictogrammen:
MANUAL SET (Handmatige instellingen)
CAMERA SET (Camera-instellingen)
VCR SET (Videorecorder-instellingen)
LCD/VF SET (LCD scherm/
zoekerinstellingen)
MEMORY SET (Geheugen-instellingen)
PRINT SET
CM SET (Cassettegeheugen-instellingen)
TAPE SET (Cassette-instellingen)
SETUP MENU
(Oorspronkelijke instellingen)
OTHERS (Overige instellingen)
Changing the menu settings
To return to FN
Press EXIT.
Menu items are displayed as the following
icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
PRINT SET
CM SET
TAPE SET
SETUP MENU
OTHERS
English
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The LCD screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
FLASH MODE
FLASH LVL
WHT BAL
N.S. LIGHT
AUTO SHTR
Mode
——
——
z ON
AUTO
AUTO
HIGH
z NORMAL
LOW
——
z ON
OFF
z ON
OFF
Meaning
To suit your specific shooting requirement
(p. 79)
To add special effects like those in films or on the TV
to images (p. 74, 95)
To fire the flash (optional) regardless of the
brightness of the surroundings
To fire the flash (optional) automatically
To fire the flash (optional) before recording to
reduce the red-eye phenomenon
To make the flash level higher than normal
To use the normal setting
To make the flash level lower than normal
To adjust the white balance (p. 67)
To use the NightShot Light function (p. 46)
To cancel the NightShot Light function
To automatically activate the electronic shutter when
shooting in bright conditions
To not automatically activate the electronic shutter
even when shooting in bright conditions
POWER
switch
CAMERA
MEMORY
VCR
CAMERA
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
Note on FLASH MODE and FLASH LVL
You can use FLASH MODE and FLASH LVL only when the external flash (optional) is set.
Note on FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level.