Filter
Top Products
253
Customising Your Camcorder Uw camcorder naar eigen inzicht aanpassen
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
Meaning
To display date, time and various settings during
playback when you press the DATA CODE button
on the Remote Commander (p. 54)
To display date and time during playback when you
press the DATA CODE button on the Remote
Commander
To set the clock to the local time. Press r/R to set a
time difference. The clock changes by the time
difference you set here. If you set the time difference
to 0, the clock returns to the originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder
To output the beep instead of the melody
To cancel melody, the beep sound and shutter sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR’s
remote control
To show the display on the LCD screen and
viewfinder
To show the display on the TV screen, LCD screen
and viewfinder
To light up the camera recording lamp at the front of
your camcorder
To turn the camera recording lamp off so that the
person is not aware of the recording
To cancel video editing
To make programmes and perform video editing
(p. 113)
To make programmes and perform MPEG editing
(p. 187)
POWER
switch
VCR
MEMORY
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
VCR
Mode
z DATE/CAM
DATE
——
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
z RETURN
TAPE
MEMORY
Changing the menu settings
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of your camcorder may
reflect on the subject if it is close. In this case, we recommend you set REC LAMP to OFF.
In more than five minutes after removing the power source
The PROGRAM AE, FLASH LVL, AUDIO MIX, WHT BAL, HiFi SOUND and COMMANDER items
are returned to their default settings.
Other menu items are held in memory even when the battery is removed.