Filter
Top Products
271
Troubleshooting Verhelpen van storingen
Warning messages
• CLOCK SET Set the date and time (p. 29).
• FOR “InfoLITHIUM” Use an “InfoLIHIUM” battery pack (p. 26).
BATTERY ONLY
• CLEANING CASSETTE The video heads are dirty (p. 292).
The x indicator and “ CLEANING CASSETTE“ message appear
one after another on the screen.
• COPY INHIBIT You tried to record a picture that has a copyright control signal
(p. 283).*
• FULL The cassette memory is full (p. 141).*
• 16BIT AUDIO MODE is set to 16BIT.* You cannot dub new sound (p. 251).
• REC MODE REC MODE is set to LP.* You cannot dub new sound (p. 251).
• TAPE There is no recorded portion on the tape.* You cannot dub new
sound.
• “i.LINK” CABLE i.LINK cable is connected.* You cannot dub new sound (p. 138).
• FULL The “Memory Stick” is full (p. 164).*
• -
The write-protect switch on the “Memory Stick” is set to LOCK
(p. 149).*
• NO FILE No image is recorded on the “Memory Stick.”*
• NO MEMORY STICK No “Memory Stick” is inserted.*
• NO STILL IMAGE FILE You select MULTI in 9PIC PRINT in the menu settings using a
“Memory Stick” containing no still image.*
• AUDIO ERROR You are trying to record an image with sound that cannot be
recorded by your camcorder on “Memory Stick” (p. 184).*
• MEMORY STICK ERROR The “Memory Stick” data is corrupted.*
• FORMAT ERROR The “Memory Stick” is not recognized (p. 151, 250).*
Check the format.
• - DIRECTORY ERROR There is more than two same directories (p. 195).*
• PLAY ERROR The image is distorted and cannot be played back.*
• REC ERROR Check the input signal, then record again.*
• Q Z TAPE END The tape has reached the end of the tape.*
• Q NO TAPE Insert a cassette tape.*
• NO PRINT MARK You selected MARKED in 9PIC PRINT in the menu settings using a
“Memory Stick” contains no image with a print mark (p. 214).
*
• DELETING You press the PHOTO button on your camcorder while deleting
data in a “Memory Stick.”*
• FORMATTING You press the PHOTO button on your camcorder while formatting a
“Memory Stick.”*
• NOW CHARGING Charging an external flash (optional) does not work correctly.*
* You hear the melody or beep sound.
Warning indicators and messages