Filter
Top Products
98
“Camera reported error: Value Error”
e camera controller returns this error when an incoming parameter value is successfully con-
verted to a number, but is out of range or otherwise inappropriate. is message should never be
encountered in normal operation.
“Camera reported error: Math Error”
e camera controller returns this error when the result of its internal calculations (possibly using
several parameters) produces an overflow or underflow. is message should never be encountered in
normal operation.
SCSI Errors
“Comm returned error: xxx”
is is an error generated by the SCSI system. e “xxx” in the message will be replaced with
the actual error number. ere are a large number of errors that the SCSI manager may return and
ViewFinder™ does not attempt to explain them. Turning off the camera and the host computer and
checking the SCSI connections to make certain the connectors are seated properly in their sockets
and that the cables are not frayed or damaged may eliminate this error. Also, check to see that there
are no other devices on the SCSI chain with the camera’s id (i.e. 6).
Other Errors
“Unknown Error”
e camera controller has reported an error with an unrecognized error number. is message
should never be encountered in normal operation.
“e camera disk is full”
ere is not enough room on the Better Light camera controller’s disk to perform the requested
scan to disk. Remember that there must be sufficient contiguous space on the disk to accommodate a
new scan.
“ere is insufficient memory available to perform that task.
Try quitting other applications.”
is error may be encountered when attempting a Scan to RAM. A Scan to RAM allocates
space from system memory (i.e. the memory not assigned to running applications of the Operating
System). Assigning more memory to the ViewFinder™ application will not help this situation. Quit
-
ting other applications, turning off some system extensions or adding more RAM to your computer
should help.