Filter
Top Products
Setting Crop/Aspect RatioN
156
The [z4: Crop/aspect ratio] setting does not work with movie shooting
and multiple exposures.
The 4:3 and 16:9 aspect ratios cannot be used with viewfinder shooting.
[83: Add cropping information] can be set only when [Full-frame]
has been set for Crop/aspect ratio.
An external Speedlite’s flash zoom (automatic flash coverage) will not
work in tandem with the [z4: Crop/aspect ratio] setting.
The image coverage with viewfinder shooting will be as follows:
•With [1.3x (crop)]: Approx. 99% vertical/horizontal coverage.
•With [1.6x (crop)]: Approx. 98% vertical/horizontal coverage.
•With [1:1 (aspect ratio)]: Approx. 100% vertical and approx. 99%
horizontal coverage.
When the image-recording quality is RAW, the image will be recorded in
full-frame and the Crop/aspect ratio setting will be appended. During
RAW image playback, the shooting area will be indicated by frame lines
on the full-frame display. However, in a slide show (p.348), only the
shooting area will appear.
If you use [83: Custom Controls] to assign [Switch between crop/
aspect] to the <B> button (p.413), you can press the <B>
button during viewfinder shooting or Live View shooting to switch the
Crop/aspect ratio shooting area (p.423).
During Live View shooting, you can use the Quick Control screen to set
[Crop/aspect ratio] (p.263).