Canon 0581C002 Digital Camera User Manual


 
k Shooting Movies
294
If [z5: V button function] is set to [ /k] or [q/k] (p.316), you
cannot take still photos.
Still photo shooting during movie shooting will have approx. 100%
coverage with L, w, and x (when the image-recording quality is
set to JPEG 73).
AEB cannot be used.
Even if a flash is used, it will not fire.
Continuous still photo shooting is possible during movie shooting.
However, the captured images will not be displayed on the screen.
Depending on the still photo’s image-recording quality, number of shots
during continuous shooting, card performance, etc., movie shooting may
stop automatically.
AF is possible during movie shooting. However, the following may occur:
Focus may become far off momentarily.
The brightness of the recorded movie may change.
The recorded movie may be momentarily still.
The movie may record the lens operation noise.
If focus cannot be achieved, you cannot shoot still photos.
Exposure compensation up to ±3 stops can be applied for still photo
shooting during movie shooting.
If you want to shoot still photos continuously during movie shooting,
using a high-speed card is recommended. Setting a smaller image-
recording quality for still photos and shooting fewer continuous still
photos are also recommended.
You can shoot still photos in all drive modes.
The self-timer can be set before you start shooting a movie. During
movie shooting, the camera will switch to single-image shooting.