Filter
Top Products
d Transferring Images to a Computer
394
3
Set the camera’s power switch to
<1>.
When the computer displays a screen
to select the program, select [EOS
Utility].
X The EOS Utility screen will appear on
the computer.
For RAW+JPEG images, you can specify
which image to transfer.
On the next page in step 2, select
[RAW+JPEG transfer], and select the
image to be transferred: [JPEG only],
[RAW only], or [RAW+JPEG].
3 Transferring RAW+JPEG Images
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility’s main window is displayed, [Direct transfer]
in step 5 on page 396 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the EOS Utility
Instruction Manual (p.522).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.