Filter
Top Products
419
83: Custom ControlsN
AI Servo AF characteristics (p.109)
Press the <p> or <A> button to perform AF with the set case
from [Case1] to [Case6].
AF operation (p.86)
Press the <p> or <A> button to perform AF with the set AF
operation.
AF area selection mode (p.90)
Press the <p> or <A> button to perform AF with the set AF
area selection mode.
If you want to keep using currently selected AF point when you press
the <p> or <A> button, set [AF start position] to [Manually
selected AF point]. If you want to keep the currently set AI Servo AF
characteristics, AF operation, and AF area selection mode, select
[Maintain current setting].
The AF will stop while you hold down the button assigned to this
function. Convenient when you want to stop the AF during AI Servo AF.
: AF stop
If [24: Orientation linked AF point] is set to [Separate AF pts:
Area+pt] or [Separate AF pts: Pt only], you can register the AF points
to be used separately for vertical (grip up or down) and horizontal
shooting.
If [AF start position: Registered AF point] and [AF area selection
mode] are both set, [Registered AF point] will take effect.