Filter
Top Products
Before You Start
70
You can set how long the image is displayed on the LCD monitor just
after shooting. To keep the image displayed, set [Hold]. To not have the
image displayed, set [Off].
1
Select [Image review].
Under the [z1] tab, select [Image
review], then press <0>.
2
Set the desired time.
Select the desired setting, then press
<0>.
The camera’s shooting function settings and menu settings can be
reverted to their defaults.
1
Select [Clear all camera settings].
Under the [54] tab, select [Clear all
camera settings], then press <0>.
2
Select [OK].
X Clearing all the camera settings will
reset the camera to the default
settings on pages 71-73.
3 Setting the Image Review Time
3 Reverting the Camera to the Default SettingsN
If [Hold] is set, the image will be displayed until the auto power off time
elapses.