Filter
Top Products
H Using Eye-Fi Cards
452
4
Display the connection
information.
Select [Connection info.], then press
<0>.
5
Check the [Access point SSID:].
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button to exit the
menu.
6
Take the picture.
X The picture is transferred and the
[H] icon switches from gray (not
connected) to one of the icons below.
For transferred images, [O] is
displayed in the shooting information
display (p.323).
H(Gray) Not connected : No connection with access point.
H(Blinking) Connecting... : Connecting to access point.
H(Illuminated) Connected:
Connection to access point established.
H(d) Transferring... : Image transfer to access point in
progress.
Transmission status