Filter
Top Products
317
General Movie Shooting Cautions
White <s> and Red <E> Internal Temperature Warning Icons
If the camera’s internal temperature increases due to prolonged movie shooting
or under a high ambient temperature, a white <
s
> or red <
E
> icon will appear.
The white <s> icon indicates that the image quality of still photos will
deteriorate. It is recommended that you stop still photo shooting for a
while and allow the camera to cool down. Since movie image quality will
hardly be affected, you can still shoot movies.
The red <E> icon indicates that movie shooting will soon be terminated
automatically. If this happens, you will not be able to shoot again until the
camera’s internal temperature decreases. Turn off the power and let the
camera rest for a while.
Shooting a movie at a high temperature for a prolonged period will cause the <
s
> or
<
E
> icon to appear earlier. When you are not shooting, always turn off the camera.
Recording and Image Quality
If the attached lens has an Image Stabilizer and you set the Image
Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all
times even if you do not press the shutter button halfway. The Image
Stabilizer consumes battery power and may shorten the total movie
shooting time or decrease the number of possible shots. If you use a
tripod or if the Image Stabilizer is not necessary, it is recommended that
you set the IS switch to <2>.
The camera’s built-in microphone will also pick up camera operation
noise. Use an external microphone (commercially available) to reduce
camera operation noise in the movie.
Do not connect anything other than an external microphone to the
camera’s external microphone IN terminal.
With autoexposure shooting or shutter-priority AE, if the brightness
changes during movie shooting, the movie may freeze temporarily. In
such cases, shoot movies with aperture-priority AE or manual exposure.
If there is a very bright light source in the image, the bright area may
appear black on the LCD monitor. The movie will be recorded almost
exactly as it appears on the LCD monitor.
In low light, noise or irregular colors may appear in the image. The movie
will be recorded almost exactly as it appears on the LCD monitor.
If you play back a movie with other devices, image or sound quality may
deteriorate or playback may not be possible (even if the devices support
MOV format).