Filter
Top Products
450
With AC Adapter Kit ACK-E6 (sold separately), you can connect the
camera to a household power outlet and do not have to worry about the
remaining battery level.
1
Connect the DC Coupler’s plug.
Connect the DC Coupler’s plug to the
AC Adapter’s socket.
2
Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
3
Place the cord in the groove.
Insert the DC Coupler’s cord to the
groove carefully without damaging
the cord.
4
Insert the DC Coupler.
Open the battery compartment cover
and open the DC Coupler cord hole
cover.
Insert the DC Coupler securely until it
locks and put the cord through the
hole.
Close the cover.
Using a Household Power Outlet
DC Coupler cord hole
Do not connect or disconnect the power cord or DC Coupler while the
camera’s power switch is set to <1>.