Filter
Top Products
3 Menu Function Settings
266
z6 N
Silent LV shootingN
•Mode 1
You can suppress the camera noise when shooting. Continuous
shooting is also possible. If <o> is set, you can shoot at a
maximum continuous shooting speed of approx. 5.0 fps.
•Mode 2
When the shutter button is pressed completely, only one shot will
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will
resume. The shooting noise is thereby minimized. Even if
continuous shooting is set, only a single shot will be taken.
• Disable
Be sure to set it to [Disable] if you use a TS-E lens (other than
those listed in below) for shifting or tilting the lens or if you
use an Extension Tube. If [Mode 1] or [Mode 2] is set, the standard
exposure may not be obtained, or an irregular exposure may
result.
If you use [Mode 1] with continuous shooting, the [Disable] setting will
be applied to the second and subsequent shots.
When shooting with flash, the [Disable] setting will be applied regardless
of the [Silent LV shoot.] setting. (Silent shooting cannot be performed.)
When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it is set to [Mode 1] or [Mode 2].
If [Mode 2] is set and you use a Remote Controller (p.237), the operation
will be the same as with [Mode 1].
With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [Mode 1]
or [Mode 2].