Filter
Top Products
487
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
* If the error still persists, write down the error number and contact your nearest
Canon Service Center.
Error Codes
Number Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
ÎClean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery again (p.25, 26, 42).
02
Card* cannot be accessed. Reinsert/change card* or format card*
with camera.
ÎRemove and insert the card again, replace the card, or format the
card (p.43, 67).
04
Cannot save images because card* is full. Replace card*.
ÎReplace the card, erase unnecessary images, or format the card
(p.43, 67, 358).
06
Sensor cleaning could not be performed. Turn the camera off and
on again.
ÎOperate the power switch (p.47).
10, 20
30, 40
50, 60
70, 80
99
An error prevented shooting. Turn the camera off and on again or
re-install the battery.
ÎOperate the power switch, remove and install the battery again, or
use a Canon lens (p.42, 47).
Error number
Cause and countermeasures