Filter
Top Products
251
3 Setting the FlashN
Shutter synchronization
Normally, set this to [First-curtain
synchronization] so that the flash fires
immediately after the exposure starts.
If [Second-curtain synchronization] is set, the flash will fire right
before the shutter closes. When this is combined with a slow shutter
speed, you can create a trail of light such as from car headlights at night
with a more natural feel. With second-curtain synchronization, two
flashes will be fired: once when you press the shutter button completely,
and once immediately before the exposure ends.
If [High-speed synchronization] is set, the flash can be used at all
shutter speeds. This is convenient when you want to shoot with
background blur (open aperture) in locations such as outdoors in
daylight.
Flash exposure compensation
You can set flash exposure
compensation up to ±3 stops in 1/3-stop
increments.
For details, refer to the Speedlite’s
instruction manual.
Flash exposure bracketing
While changing the flash output
automatically, three shots will be taken.
For details, refer to the instruction
manual of a Speedlite equipped with
flash exposure bracketing.