Filter
Top Products
381
Preparing to Print
6
Play back the image.
Press the <x> button.
X The image will appear with the <w>
icon on the upper left of the screen to
indicate that the camera is connected
to a printer.
Make sure the printer has a PictBridge connection port.
Use the provided interface cable or one from Canon (p.454). When
connecting the interface cable, use the provided cable protector (p.36).
Movies cannot be printed.
The camera cannot be used with printers conforming only to CP Direct or
Bubble Jet Direct.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.388).
Printing is not possible if Multi Shot Noise Reduction or the HDR Mode is
set.
You can also print RAW images taken with this camera.
You can also print JPEG/RAW images shot when [z4: Crop/aspect
ratio] (p.154) is set.
If you use a battery to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to approx. 3 hr. is possible.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E6 (sold separately) to
power the camera is recommended.