Filter
Top Products
Troubleshooting Guide
486
If you selected [Clean nowf], the shutter will make a noise, but no
picture is taken (p.374).
If you repeatedly turn the power switch <1> / <2> at a short
interval, the <f> icon may not be displayed (p.47).
Contents displayed on the screen vary depending on the printer. This
instruction manual lists all the printing effects available (p.384).
When using EOS Utility (EOS software), set [z5: Time-lapse movie]
to [Disable] (p.306).
Install the EOS software (EOS DIGITAL Solution Disk CD-ROM) on
the computer (p.520).
Check that EOS Utility’s main window is displayed.
Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
Automatic sensor cleaning does not work.
Printing-Related Problems
There are fewer printing effects than
listed in the instruction manual.
Computer Connection Problems
Communication between the connected camera and
computer does not work.
I cannot transfer images to a computer.