Filter
Top Products
119
Changing the Focusing Method
If the focus is far off, face detection will not be possible. If you set
[Continuous AF] to [Enable], you can prevent the image from becoming
greatly out of focus.
An object other than a human face may be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, or partially hidden.
The <p> may cover only part of the face.
When you press the <XL> button, the < > AF point will appear at the
center of the screen. Drag it to move the AF point. Press the <XL>
button again, and the AF point will move to the detected subject.
Since AF is not possible with a face detected near the edge of the
picture, the <p> will be grayed out. If you press the shutter button
halfway, the subject will be focused in FlexiZone - Multi method with
automatic selection.
COPY