Filter
Top Products
Changing the Focusing Method
120
Up to 31 AF points (automatically selected) covering a wide area can be
used to focus. This wide area can also be divided into 9 zones for
focusing (zone selection).
1
Select the AF zone. N
Pressing the <XL> button will toggle
between automatic selection and
zone selection. In Basic Zone modes,
automatic selection will be set.
To select a zone, tap it on the screen.
To return to the center zone, press
the <XL> button.
During zone selection, tap the [ ]
icon on the screen to switch to
automatic selection.
2
Focus the subject.
Aim the AF point over the subject and
press the shutter button halfway.
X When focus is achieved, the AF point
turns green and the beeper sounds.
(If [AF operation] has been set to
[Servo AF], the AF point remains
white and the beeper will not sound.)
X If focus is not achieved, the AF point
will turn orange.
3
Take the picture.
Press the shutter button completely
(p.67).
FlexiZone - Multi:
o
COPY