Filter
Top Products
3 Noise Reduction SettingsN
162
2
Set the setting.
Select the desired setting, then press
<Q/0>.
X The setting screen closes and the
menu will reappear.
[Auto]
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This
[Auto] setting is effective in most cases.
[Enable]
Noise reduction is performed for all exposures of 1 sec. or longer.
The [Enable] setting may be able to reduce noise that otherwise
cannot be detected with the [Auto] setting.
3
Take the picture.
The image applied with noise
reduction is recorded.
With [Auto] and [Enable], the noise reduction process after the picture is
taken may take the same amount of time as the exposure. You cannot
take another picture until the noise reduction process is completed.
Images taken at ISO 1600 or higher may look grainier with the [Enable]
setting than with the [Disable] or [Auto] setting.
If [Auto] and [Enable] are set and you are taking a long exposure,
“BUSY” will be displayed during the noise reduction process and you
cannot take another picture.
COPY