Filter
Top Products
3 Movie Menu Function Settings
198
[Manual] : For advanced users. You can adjust the recording
level manually.
Select [Rec. level] and while looking at the level
meter, press the <YA>/<ZO> button to adjust.
The loudest sound will be displayed for approx. 3 sec.
Adjust so that the level meter on the right of “12” lights
up occasionally. If the level meter lights up near “0”,
the sound may be distorted.
[Disable] : Sound is not recorded.
[Wind filter]
When set to [Enable], it reduces wind noise when there is wind
outdoors. This feature takes effect only with the built-in
microphone.
Note that [Enable] will also reduce low bass sounds, so set this
function to [Disable] when there is no wind. It will record a more
natural sound than with [Enable].
[Attenuator]
Even if you set [Sound recording] to [Auto] or [Manual] and
shoot, sound distortion may still result if there is a very loud sound.
In such a case, setting it to [Enable] is recommended.
Video snapshot
You can shoot video snapshots. For details, see page 189.
The sound volume balance between L (left) and R (right) cannot be
adjusted.
Both L and R record audio at a 48 kHz/16-bit sampling rate.
COPY