Filter
Top Products
Changing the Focusing Method
124
The default setting is [Enable].
Since the focus is constantly close to the subject, when you press the
shutter button, the camera quickly focuses the subject. If [Enable] is
set, the lens will operate frequently and consume more battery power.
This will reduce the number of possible shots (battery life).
When an EF or EF-S lens is used, during Continuous AF, turn off the
power before setting the lens’s focus mode switch to <MF>.
Set the Focus mode to [AF+MF].
After focus is achieved using AF, you can adjust the focus manually as
desired using the focusing ring while holding the shutter button pressed
halfway.
However, in <5> mode (p.81) or if [AF operation] is set to [Servo AF]
(p.131), priority is given to Servo AF. In such cases, even if you set the
focus mode to [AF+MF], you will not be able to focus manually.
Using Continuous AF
Using AF+MF Mode (Full-time manual focusing)
COPY