Filter
Top Products
37
If you set the power to <1> and the time zone/date/time setting
screen appears, see page 40 to set the time zone and date/time.
Pressing the power button toggles
between <1> and <2>.
With the power <2>, holding down
the <x> button for 2 sec. or longer will
start the playback mode.
When an EF-M lens is attached to the
camera and the power is off, the
aperture stops down to shut out the
light and protect the inside of the
camera. When you set the power to
<1> or <2>, the aperture
makes a small noise as it opens.
When you set the power to <1>/<2> or if [Camera auto off]
takes effect and the camera turns off, the image sensor will be
cleaned automatically (making a small noise). During the image
sensor cleaning after intentionally turning the camera <2>, the
LCD monitor will display <f>.
If you repeatedly switch the power to <1>/<2> at a short
interval, the <f> icon may not be displayed. This is normal and
not a problem.
The automatic self-cleaning of the image sensor can be enabled or
disabled with the menu (p.225).
Turning on the Power
About the Automatic Self-Cleaning Sensor
COPY