Filter
Top Products
147
f: Changing the Depth of Field
The aperture opening (diaphragm) changes only at the moment when
the picture is taken. Otherwise, the aperture remains fully open.
Therefore, when you look at the scene on the LCD monitor, the depth of
field will look narrow.
You can check the depth of field with the procedure below.
1
Enable depth-of-field preview.
Under [54: Custom Function
(C.Fn)], set [6:
XL button function]
to [1: Depth-of-field preview]
(p.287).
The Custom Function setting
procedure is explained on page 282.
2
Exit the menu.
3
Press the <XL> button.
X The aperture will stop down and you
can check the depth of field.
Depth of Field PreviewN
COPY