Filter
Top Products
178
Connecting the camera to a TV set is recommended to play back the
movies shot (p.247, 251).
When you select the Movie shooting mode [k], autoexposure is set to
adjust the brightness automatically.
1
Set the Mode Dial to <k>.
2
Select [k] (Movie auto
exposure) for the shooting mode.
3
Focus the subject.
Before shooting a movie, focus with
AF or manual focus (p.116-126).
By default, [Movie Servo AF:
Enable] (p.199) is set for continuous
focusing.
When [Movie Servo AF] is set to
[Enable], you can tap [ ] on the
screen’s lower left to stop/start the
focusing. If you stop the focusing, the
AF point will turn gray.
4
Shoot the movie.
Press the <o> (Movie start/stop)
button to start shooting a movie. To
stop shooting the movie, press the
<o> (Movie start/stop) button again.
X While the movie is being shot, the
“o” mark will be displayed on the
upper right of the screen.
k Shooting Movies
Autoexposure Shooting
Recording movie
Microphone
COPY