Filter
Top Products
34
Load a fully charged Battery Pack LP-E12 into the camera. The card
(sold separately) can be an SD, SDHC, or SDXC memory card. SDHC
and SDXC cards with UHS-I can also be used. The captured images
are recorded onto the card.
Make sure the card’s write-protect switch is set upward to
enable writing/erasing.
1
Open the cover.
Slide the lever as shown by the
arrows and open the cover.
2
Insert the battery.
The battery’s “Canon” logo must be
toward the camera’s front side as you
insert the battery with the battery
contacts in first.
Insert the battery until it clicks and
locks in place.
3
Insert the card.
The card’s label side must be
toward the front of the camera.
Insert it straight down until it stops.
Installing and Removing the Battery and Card
Installing the Battery and Card
Write-protect switch
COPY