Filter
Top Products
f Automatic Sensor Cleaning
226
In step 2, select [Auto cleaningf] and set it to [Disable].
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc. Before cleaning the sensor,
detach the lens from the camera.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
1 Set the power to <2>.
2 Detach the lens.
3 Clean the sensor.
4 End the cleaning.
Disabling Automatic Sensor Cleaning
Manual Sensor Cleaning
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. It
can damage the shutter curtains.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
If a smudge that cannot be removed with a blower remains, having the
sensor cleaned by a Canon Service Center is recommended.
COPY