Filter
Top Products
313
Troubleshooting Guide
Make sure the card is properly inserted (p.34).
Slide the card’s write-protect switch to the Write/Erase position
(p.34).
If the card is full, replace the card or delete unnecessary images
to make room (p.34, 254).
If a card error message is displayed, see page 36 or 323.
Set the focus mode to <AF> (p.116).
To prevent camera shake, press the shutter button gently (p.48, 49).
If the lens has an Image Stabilizer, set the IS to <1> (p.46).
In low light, the shutter speed may become slow. Use a faster shutter
speed (p.142), set a higher ISO speed (p.109), use flash (p.138), or
use a tripod.
Set the AF operation to One-Shot AF. Focus lock is not possible in the
Servo AF operation (p.131).
Keep tracking the subject with the shutter button pressed completely.
Shooting-Related Problems
No images can be shot or recorded.
The card cannot be used.
The image is out of focus.
I cannot lock the focus and recompose the shot.
When Servo AF is set, it takes longer for the shutter to be released.
COPY