Filter
Top Products
7-6
Message
Explanation
●A023 Detection in change of point of contact (err)
a %1 detected at In%2
%1
point of contact device input change (front-edge | rear-edge | pulse | notch)
%2
Point of contact input terminal number (1 to 2)
A change was detected at point of contact device terminal In1 or In2.
front-edge denotes OFF → ON, rear-edge denotes ON → OFF, pulse
denotes OFF → ON → OFF, and notch denotes ON → OFF → ON. pulse
and notch are brief (10-20 milliseconds) ON and OFF periods detected
during OFF and ON states respectively.
Message
Explanation
Response
●A022 Applet archive load failure (warning)
archive/%1 not found
Applet archive file does not exist or is corrupted.
Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM
and reboot.
%1
Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | digits.gif)
Log Messages
Message
Explanation
●A015 WebView Administrator Viewer start (info)
%1@%2 privilege granted
The WebView Administrator Viewer has started operation.
%1
Type of clients (LS/C | LS/D)
%2
Client host IP address
Message
%3
●A016 Amount of transmitted video data (info)
%1@%2 %3 frames / %4 bytes in %5 seconds
Number of frames
%1
Client type (LS/D | LS/H)
%2
Client host IP address
Explanation
This shows the results of video transmission for a video transmission client.
%4
Number of bytes
%5
Video transmission time