Filter
Top Products
2-2
Set up the camera1
Perform initial settings for the camera3
Connect the camera to the network2
LAN cable
VB-C50i
Hub
Set up the device.
Make sure the device is set up properly (→ P.2-4).
Connect the camera and your PC via the hub (→ P.2-6).
Insert the CD-ROM provided into your
PC and perform initial settings following
instructions on the screen (→ P.2-7).
Supplied CD-ROM
Setup Workflow
The flow for setting up and checking the camera’s images involves performing various settings
after the device is set up and your PC and the network are connected via the hub. Then, check to
see if you can display images from the camera.