Filter
Top Products
181
OTHER SETTINGS
When changing the date and time setting, be sure to do so for
your Home City (the location where you normally use the
camera). If you already have your Home City setting configured
correctly, you can use the procedure under “Setting the Date
and Time for Your Home City” (page 182) to change the current
time setting only, if you want.
IMPORTANT!
• Changing the time and date setting without correctly
configuring your Home City setting first will cause all of the
World Time (page 184) dates and times to be off.
■ Selecting Your Home City
1. Press [MENU].
2. On the “Set Up” tab, select “World Time” and
then press [X].
This displays the current World Time settings.
To have the camera do this:
Select this
setting:
Remember the numbers used for files.
Files will be named using the next
sequential number, even if files are
deleted or if a blank memory card is
loaded.
• If a memory card is loaded that
already has files stored on it and the
largest sequential number in the
existing file names is greater than the
largest sequential number
remembered by the camera,
numbering of new files will start from
the largest sequential number in the
existing file names plus 1.
Continue
Restart the serial number from 0001
whenever all files are deleted or when
the memory card is replaced with a blank
one.
• If a memory card is loaded that
already has files stored on it,
numbering of new files will start from
the largest sequential number in the
existing file names number plus 1.
Reset
Changing the Camera Date and Time
Setting
B