Casio EX-Z1050 Digital Camera User Manual


 
36
GETTING READY
2. Plug the battery charger into a household
power outlet.
This will cause the [CHARGE] lamp to turn red.
It takes about 150 minutes to achieve a full charge. Actual
charging time depends on current battery capacity,
remaining power, and charging conditions.
When charging is complete
The [CHARGE] lamp will go out. Unplug the power cord from the
power outlet and then remove the battery from the charger.
If the [CHARGE] lamp does not light red
Charging cannot be performed because ambient temperature or
temperature of the charger is too hot or too cold. Wait until the
camera returns to normal temperature. When the camera
returns to a temperature where charging can be performed, the
[CHARGE] lamp will light red.
If the [CHARGE] lamp flashes red
The battery is faulty or the battery is loaded in the charger
incorrectly. Remove the battery from the charger and check if its
contacts are dirty. If they are, wipe them off with dry cloth and
then reload the battery into the charger. When experiencing
charging problems, also check to make sure that the power cord
is not disconnected from the power outlet or charger.
[CHARGE] lamp
If an error still continues to occur after you perform the above
steps, it could mean that the battery is faulty. Contact your
nearest CASIO authorized service center.