Fujitsu FI-6140Z Photo Scanner User Manual


 
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
128
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Device Errors
The following are lists of device errors which require
troubleshooting by a service engineer.
Internal and optical errors
"E" and "alarm number" are displayed back and forth.
Overrun error
"F" and "alarm number" are displayed back and forth.
Chip error
"C" and "alarm number" are displayed back and forth.
Display Item Resolution
E0 Flatbed motor
malfunction
(fi-6230Z/fi-6240Z)
1 Confirm that the transport lock
switch is not locked.
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
E1 Optical error
(Flatbed)
(fi-6230Z/fi-6240Z)
E2 Optical error (ADF
Front)
1 Clean the glass section.
For details about cleaning, refer to
"Chapter 6 Daily Care" (page 108).
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
E3 Optical error (ADF
Back)
E6 Operator panel
error
Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
E7 EEPROM error
E8 SCSI error
(fi-6140Z/fi-6240Z)
E9 Memory error
Display Item Resolution
F4 Background
switching
mechanism error
Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
Display Item Resolution
C0 LSI error Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.