Fujitsu FI-6140Z Photo Scanner User Manual


 
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
80
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
Scanning a Large Document on the Flatbed
(fi-6230Z/fi-6240Z)
1 Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
6230Z/fi-6240Z)" (page 25).
2 Remove the document cover by pulling it out in the
direction of the arrow.
3 Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4 Start up ScandAll PRO and select the [Scan] menu J
[Scanner Setting].
D The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu J [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
Reference point