Fujitsu FI-6140Z Photo Scanner User Manual


 
Appendix
Chapter 8 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
129
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Troubleshooting
Motor circuit error
"H" and "alarm number" are displayed back and forth.
Option error (when imprinter is installed)
"A" and "alarm number" are displayed back and forth.
Sensor error
"L" and "alarm number" are displayed back and forth.
Display Item Resolution
H0 Motor circuit error Turn the scanner off then back on.
If the problem persists, write down the
displayed error code and contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
H6 Imprinter system
malfunction
H7 Lamp circuit error
H8 Motor circuit error
(background
switching
mechanism)
Display Item Resolution
A0 Imprinter error
(control board)
1 Confirm that the EXT cable of the
imprinter is connected properly to
the EXT connector on the back of
the scanner.
For details, refer to the fi-614PR
Operator’s Guide.
2 Confirm that the print cartridge is
installed correctly.
For details, refer to the fi-614PR
Operator’s Guide.
3 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
A1 Imprinter error
(communication
time-out)
A2 Imprinter error
(print head)
A3 Imprinter error
(EEPROM)
A4 Imprinter error
(ROM)
Display Item Resolution
L6 Sensor error 1 Clear any dust around the
ultrasonic sensors.
2 Turn the scanner off then back on.
If the problem persists, write down
the displayed error code and
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.