Filter
Top Products
18
Handling the AC Adapter
Be sure to use only the specified AC adapter (SQPH20W10P-02). Using a different AC
adapter might cause the camera to malfunction.
Before using the AC adapter, carefully read and observe the “Safety Precautions” (
p.8) and the notes described below:
• Do not allow the connectors on the AC adapter to come into contact any other metal
object because this might cause a short circuit.
• To connect the AC adapter, fully insert the DC plug on the AC adapter into the DC IN
10V terminal on the camera or the cradle (comes with GSC-R60).
• When disconnecting the AC adapter cable or DC plug, turn the power OFF, then
disconnect while holding its plug. Do not disconnect by pulling the actual cable.
• Do not drop the AC adapter or subject it to strong impact.
• Do not use the AC adapter in very hot and humid places.
• Do not insert the DC plug on the AC adapter while the battery is being used. Turn the
power OFF first.
• The AC adapter is for indoor use only.
• Do not connect the supplied AC adapter to a device other than this camera.
• The AC adapter may sometimes become warm during use. This is normal.
• Buzzing noises may come form inside the camera. This is normal.
• Do not use the AC adapter near a radio because it could interfere with the radio.
• If you remove the battery or AC adapter while the camera is in operation, the date may
be lost from the memory. If this happens, reset the date.
Specifications
AC adapter (SQPH20W10P-02)
Input : 100 V to 240 V AC, 50/60 Hz
Rated output : 10 V DC, 2.0 A
Operating temperature : 32°F (0°C) to +104°F (+40°C)
Storage temperature : –40°F (–40°C) to +140°F (+60°C)
Dimensions : 1.9 inches ✕ 1.0 inches ✕ 3.9 inches (49.5 mm ✕ 25.5 mm
✕ 99.5 mm) (W ✕ H ✕ D)
Weight : Approx. 7.1 oz (200 g)
MEM
O
• Use the power supply indicated on the supplied AC cable. When using power
supply other than the displayed voltage in other countries/region, please
purchase the AC cable that applies to the standard of the country/region.