Filter
Top Products
20
Charging the Battery
• Charging is done with the camera body. You must not charge the battery with any other
charger.
• When you use the battery for the first time or when the battery has not been used for a
long time, be sure to charge the battery before use.
• Use only the specified AC adapter (SQPH20W10P-02).
• This battery does not need to be fully discharged or exhausted before being charged.
• The battery may feel warm after it has been charged or immediately after being used.
This is normal and not a malfunction.
• The battery can be charged at temperatures between about +50°F (+10°C) and +86°F
(+30°C) to obtain maximum battery performance.
• Do not recharge a fully charged battery.
Getting the Most Out of Your Battery
• Even when the camera is turned off, a very small current continues to flow. If you do not
intend to use the camera for a long period, you should take the battery out of the
camera. If the battery is left out of the camera for approximately 48 hours, the date, time
and other camera settings may revert to the default values. Reset these settings before
using the camera.
• Battery performance that has been impaired by low temperatures will recover when the
camera is returned to room temperature (77°F (25°C)).
Specifications
Lithium-ion battery (GSC-BT5)
Nominal voltage : 7.4 V
Nominal capacity : 1200 mAh
Operating temperature : +32°F (0°C) to +104°F (+40°C)
Dimensions : 2.1 inches ✕ 2.9 inches ✕ 0.3 inches (53 mm ✕ 73 mm ✕ 8 mm)
(W ✕ H ✕ D)
Weight : Approx. 2.0 oz (58 g)