Filter
Top Products
Appendix
187
The flash does
not fire.
The flash is set to
[SUPPRESSED FLASH].
Set the flash to a different
setting.
60
The flash is set to [AUTO] or
[RED-EYE REDUCTION], but
the flash does not fire because
the surroundings are too bright.
Set the flash to [FORCED
FLASH]. In the [AUTO] and
[RED-EYE REDUCTION]
settings, the flash does not fire
in bright situations.
60
The scene setting is
[LANDSCAPE], [SPORTS] or
[SUNSET].
Select a different scene setting
(not [LANDSCAPE], [SPORTS]
or [SUNSET]).
58
You shot a still image during
video recording.
You cannot use the flash when
shooting still images during
video recording.
67
Continuous recording is set to
[CONTINUOUS RECORDING]
or [AEB].
Select the [1 SHOT] continuous
recording setting. 76
I can’t shoot
still images
during video
recording.
There is less than 10 seconds
of available video recording
time left.
You cannot shoot still images
during video recording when
there is less than 10 seconds of
available video recording time
left.
67
An image with the file number
“9998” or “9999” exists.
Stop video recording and create
a new album before trying to
shoot still images.
72
Video
recording
suddenly
stopped.
There is no more space
available on the recording
destination drive.
Use another SD card.
Change the destination drive.
Erase some images.
Edit one or more videos.
Move some images to a
different drive or onto a PC or
DVD, etc.
33
74
130
124
162
You are using a low-speed SD
card.
Use a fast SD card (10MB/sec.
or better).
22
The camera was struck or
shaken during shooting.
Avoid striking or shaking the
camera.
–
The hard disk drive protection
function was activated.
Avoid moving the camera
suddenly during shooting.
Set the HDD protection to
[OFF].
143
Problem
Cause Solution Page