Open as PDF
- 94 -
Basic Photographic Settings (SET-UP mode) (continued)
Press the button.
The tab menu is displayed.
How to set the time
Use the or buttons to change the setting in
the tab menu, and press the ENTER button.
To cancel changing of settings, press the button.
To quit the SET UP menu, change the mode dial setting.
If no operation is carried out for a fixed amount of time (default: about one minute), power consumption
is set to its minimum state (power almost turned OFF) to prevent battery wear. This is called the Auto
Power OFF mode. This setting allows you to set the time until the camera is set to the Auto Power OFF
mode. This function is not activated during automatic playback (
Page 75) or in the [ ] PC mode. To
return to the normal state from the Auto Power OFF mode, either change the mode dial or press the
shutter down half way for at least two seconds (
[1 MIN] (default)