Filter
Top Products
AutoDome Easy II IP On-Screen Display Menu Navigation | en 111
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
13.8 Alarm I/O Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you
add new rules or modify an existing rule. The default setting is
Empty.
Menu items marked with the ‡ symbol are available only with
VG4 Pressure Domes.
NOTICE! You can program a total of twelve rules. You must
define the inputs and outputs before you program a rule. See
Section 1.7 Alarm I/O Setup, Page 192, to configure alarm
inputs and outputs.
Alarm I/O Rule Setup... Rule 1
Exit... Exit...
1. Rule 1 Enabled Enabled No
2. Rule 2 Disabled Input:
3. Rule 3 Invalid Physical Input 1
4. Rule 4 Empty NONE
5. Rule 5 Empty NONE
6. Rule 6 Empty NONE
7. Rule 7 Empty Output:
8. Rule 8 Empty Physical Output 1 Follows
9. Rule 9 Empty OSD
Empty Aux On 78 Latched
Empty NONE
Empty
Focus / Iris: Select Focus / Iris: Select Type