Filter
Top Products
120 en | Common User Commands (unlocked) AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
To add or remove scenes to Preposition Tour:
1. Press SHOT-900-ENTER to access the Add/Remove
Scenes Menu.
2. Use the Focus/Iris buttons to add or remove the selected
scene from the tour.
To change the dwell period of a tour:
1. Press ON-15-ENTER to access the Tour Period Menu.
2. Follow the on-screen instructions.
14.4 Programming the Inactivity Operation
You can program the AutoDome Easy II to automatically change
its operating mode after a period of inactivity.
To access the Inactivity mode (locked command):
1. Press OFF-90-ENTER to turn off the command lock.
2. Press ON-9-ENTER to access the Inactivity Mode Menu.
3. Select one of the following choices:
– Return to Scene 1: Returns the camera position back
to the first scene saved in memory.
– Recall Previous Aux: Returns the camera to the
previous operating mode, such as a Preposition Tour.
14.5 Recorded Tours
The AutoDome Easy II can make up to two (2) recorded tours. A
Recorded Tour saves and then plays back up to 15 minutes of
all manual camera movements made during the recording,
including its rate of pan, tilt and zoom speeds and other lens
setting changes.
To Record Tour A:
1. Press ON-100-ENTER to start recording a tour.
2. Press OFF-100-ENTER to stop recording.
To playback Recorded Tour A:
1. Press ON-50-ENTER to begin continuous playback.
2. Press OFF-50-ENTER or move the joystick to stop playback