Filter
Top Products
AutoDome Easy II IP On-Screen Display Menu Navigation | en 113
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
Input Toggles through a list
of valid inputs set in
the Alarm I/O Setup >
Inputs Setup Menu
that define the rule's
inputs. A rule can have
up to four (4) inputs.
Alarm Inputs 1 – 2 and
any additional inputs
which were set in the
Inputs Setup Menu,
including Aux On/Off
(1-99), Shot, and NONE.
NONE
Output Toggles through a list
of valid outputs set in
the Alarm I/O Setup >
Outputs Setup Menu
that defines a rule's
outputs.
Alarm Output 1 and any
additional outputs set in
the Outputs Setup
Menu including: Aux
On/Off (1-99), Shot,
OSD, Transmit, and
NONE.
Some outputs, such as
Alarm Output 1 and Aux
On/Off can be set to be
active for a specific
duration of time as
follows:
Seconds: 1-5, 10, 15, or
30
Minutes: 1-5 or 10
Latched: The alarm
stays active until
acknowledged.
Follows: The alarm
follows the alarm rule.
NONE
Menu Description Sub-menu / Description Default
Setting
NOTICE! You can include up to four (4) Input and Output
events in a single rule. Each input and output, however, must be
true for the alarm's rule to be valid and enabled.