Filter
Top Products
AutoDome Easy II IP Preparing the Wiring | en 63
Bosch Security Systems, Inc. Installation Manual F.01U.164.576 | 2.0 | 2010.03
8 Preparing the Wiring
The wiring requirements for the various AutoDome Easy II
models differ slightly. There are four (4) types of wires: control,
video, power, and alarm, and each model has different wiring
requirements. Each section provides the specifications for the
recommended wire.
8.1 Power
The recommended power cable is a 2-conductor, 14-18 gage
cable, depending on the distance.
Table 8.1 Max. Wire Distances from Power Supply to AutoDome Easy II
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.
VA / Watts 14 AWG
(2.5 mm)
16 AWG
(1.5 mm)
18 AWG
(1.0 mm)
Camera, Indoor models
24 VAC to AutoDome Easy II 18 / 10 632 ft
(193 m)
398 ft
(121 m)
250 ft
(76 m)
12 VDC to AutoDome Easy II 10 W 285 ft
(87 m)
179 ft
(55 m)
112 ft
(34 m)
Camera and Heater, Outdoor models only
24 VAC to AutoDome Easy II 18 / 10 632 ft
(193 m)
398 ft
(121 m)
250 ft
(76 m)
24 VAC to Heater 25 / 25 455 ft
(139 m)
287 ft
(67 m)
180 ft
(55 m)