Filter
Top Products
72 en | Alarms and Relay Connections AutoDome Easy II IP
F.01U.164.576 | 2.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.
9.3 Alarm Outputs
The AutoDome Easy II incorporates one (1) alarm output: a dry
contact relay.
Figure 9.4 N.O. - Normally Open
9.3.1 Connecting an Open Collector Output
Output 1 is an open collector. This output must be connected
to a positive voltage between 5 and 32 V to complete the
circuit, with a maximum voltage rating of 32 VDC @ 150 ma.
1. Connect the appropriate stripped wire to the open
collector of the transistor’s white wire.
2. Connect the appropriate stripped wire to the ground
(GND) connector.
Ref. # Description Color
1 Dome n/a
2 Normally Open White
3Ground Green
4 Alarm In n/a
5 User Supplied Device (i.e. Allegiant or DVR) n/a
6 Ground/Common n/a
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
C
E
B
NPN